| Mobile
Phone LCD Tester |
| Universal
Nokia LCD Tester |
Universal
LCD inspector |
Mobile
Phong Test JIG |
Universal
Nokia LCD Tester
|
This
lcd tester can be used
to inspect the quality
of Nokia serial lcd
which are both original
& OEM, single screen
& with board.
Features:
· Inspect lines
distributing, color
and definition of display,
judge the quality of
lcd.
· Operating is
fast and easy,user only
need to press the red
button after lcd is
put on the tester,the
testing result will
be known after a few
seconds
· Outside power
supply
· Can be used
on both original, OEM,
single screen &
with board
Suitable
models:
Nokia 3310/3210/8210/8250/8850/5110/6110
|
Universal
LCD Inspector
|
| This
inspector can be used
to inspect the quality
of Nokia 3310/3210 lcd
Features:
· Inspect lines
distributing, color
and definition of display,
judge the quality of
lcd.
· Operating is
fast and easy
· 9V battery
and 2pcs AAA battery
requested
· While installing
LCD, adequately large
contact area for device's
conducting wire shall
be ensured, and the
pressure on the whole
contact area shall be
kept evenly
· Only used on
single screen. (board
and frame are unallowed)
Packing:
· 1pc Main battery
inspector
· 1pc 9v battery
· 1pc clip to
put AAA battery
The following models
of lcd inspector is
available:
Nokia 3310/3210
Nokia 8210/8250/8850
Nokia 5110/6110
|
| Nokia
mobile phone test JIG |
 |
 |
 |
| Nokia
3210 LCD Teste Box |
Nokia
3310 LCD Test box for
3310 3350 3330 |
Nokia
8210 LCD Test box for
Nokia 8210 8250 |
 |
 |
|
| Nokia
8310 LCD Test Box For
Nokia 8310 |
Ericsson
T28 LCD test Box for Ericsson
T29 T28 T20 |
|
Functions:
· Remove adjuct
board (if necessary, could
insert sim card) ; aim
at four
position bulge and mounting
into main board with edged
hole.
· Press main board
and further swing the
spring to settle it.
· Aim at the position
plug and connect with
adjunct board .
· Put LCD down
on its position in testing
frame and screw it.
· Supply power,
youi will free to check
with various problem by
other kind of measuring
set, and can even connect
to softwre instrument
or computer throught related
interface to upgrade/unlock/repair/test.
· It is essential
that when need to solder
normal on testing frame,
shoule
remove adjunct board and
release spring.
· When want to
make detecting for LCD,
fix a normal handset first
as above
case and press the testing
LCD on its related position
in testing frame.
the result will out. |
